JM300 is a SOLVENT FREE modified acrylic emulsion adhesive. It is designed to provide a permanently tacky film for the positive holding of “loose-lay” carpet tiles but to enable them to be lifted and replaced easily when required.
The adhesive is easy to apply by either roller or brush. It is non-staining, resistant to plasticiser migration, suitable for use over normal underfloor heating systems and will withstand normal wet cleaning techniques.
|PRODUCT NAME||Surface Tackifier|
5kg, 25kg plastic jerry cans and 15kg rectangular buckets
Approx. 6,000 cps at 20°C - roller or brush apply
Between 6m² - 10m² per kg depending on trowel used & absorbency of sub floor
Not applicable. However, dried surface of adhesive must be kept free from contamination until flooring has been placed
Store between temperatures of 5°C and 30°C
12 months in unopened containers, stored in recommended conditions
Tools should be cleaned with water whilst the adhesive is wet. Use hot water or Morleys Solvent Cleaner should the adhesive dry. Do not use on the skin