A SOLVENT FREE acrylic, co-polymer, emulsion adhesive that can be applied by either trowel or roller. It dries to a permanently tacky finish. When laid into “dry” it provides a releasable bond, particularly for specific contract underlays developed for “double stick”.


  • Category: Adhesives

Description

When laid into “wet” it provides a permanent bond. It is nonstaining, resistant to plasticiser migration, is suitable for use over normal underfloor heating systems and will withstand normal wet cleaning techniques.



PRODUCT CODE
JM200
PRODUCT NAME
Peelbond Tackifier
CONTAINER SIZE
5kg & 15kg plastic buckets
TYPE
Acrylic Emulsion
COLOUR
Off White
VISCOSITY

Approx. 25,000 cps at 20°C - trowel or roller apply

COVERAGE

Between 4m² - 9m² per kg depending on trowel used & absorbency of sub floor

OPEN TIME

Wet application - approximately 40mins depending on temperature, humidity, sub floor porosity & trowel used. Dry application - not applicable, however dried surface of adhesive must be kept free from contamination until floor covering has been placed

STORAGE

Store between temperatures of 5°C and 30°C

SHELF LIFE

12 months in unopened containers, stored in recommended conditions

CLEANING

Tools should be cleaned with water whilst the adhesive is wet. Use hot water or Morleys Solvent Cleaner should the adhesive dry. Do not use on the skin


DOWNLOADS
JM200 Technical Data Sheet
(rev Jan 2019)
JM200 Safety Data Sheet
(rev Dec 2020)